Convert Tuya devices to Zumungo

  1. Follow the instructions provided here https://github.com/ct-Open-Source/tuya-convert
  2. Replace these commands# git clone https://github.com/ct-Open-Source/tuya-convert# cd tuya-convert

    # ./install_prereq.sh

  3. Replacement for the above commands# git clone http://……….(pick from the content below)………

    # cd tuya-convert

    # ./install_prereq.sh

  4. Zumungo content to replace in the command above

For relay control on ESP8266 based hardware –  http://www.zumungo.com/wp-content/uploads/firmware/ProjectR.bin_esp8266

For relay control plus temperature sensors on ESP8266 based hardware –  http://www.zumungo.com/wp-content/uploads/firmware/ProjectR1.bin_esp8266

For relay control on ESP32 based hardware –  http://www.zumungo.com/wp-content/uploads/firmware/ProjectR.bin_esp32

For relay control plus temperature sensors on ESP32 based hardware –  http://www.zumungo.com/wp-content/uploads/firmware/ProjectR1.bin_esp32

For keypads/sensors on ESP8266 based hardware –  http://www.zumungo.com/wp-content/uploads/firmware/ProjectM.bin_esp8266

For keypads/sensors on ESP32 based hardware –  http://www.zumungo.com/wp-content/uploads/firmware/ProjectM.bin_esp32

For stepper motors on ESP32 based hardware –  http://www.zumungo.com/wp-content/uploads/firmware/ProjectS.bin_esp32

 

© 2021 ZUMUNGO IoT Enabling Automation
All Rights Reserved