We do not sell hardware here at this web site. Here is a list of hardware that has been tested with Zumungo software. If a piece of hardware is not listed here than it doesn’t mean that it will not work with Zumungo. We encourage you to try Zumungo with any piece of hardware and share with us at the forum here what does work and what does not. Remember trying doesn’t cost you anything as Zumungo is available for a free trial no credit card required.
Shelly line of products | ||
Pros | Miniature size fits in existing electrical boxes | |
Supports multiple AC and DC power sources incl 110/220 V AC | ||
Has pins for Tx, Rx, 3.3V, GND, GPIO0. Zumungo converts Tx and Rx to GPIO3 and GPIO1 | ||
Programming (flashing Zunumgo) not a problem using Tx, Rx, GDN, 3.3V and external USB to serial board such as FTDO232. | ||
Enough memory for OTA (over the air) uploads and updates. | ||
Relay is 16A as opposed to 10A of most competitors. | ||
Cons | More expensive than some other boards | |
High voltage at the board at all time if you choose to power from the main AC power supply at home. | ||
Sonoff line of products | ||
Pros | AC powered from main 110/220 V AC | |
The cheapest of them all | ||
Has pins for Tx, Rx, 3.3V, GND. Zumungo converts Tx and Rx to GPIO3 and GPIO1 | ||
Programming (flashing Zunumgo) not a problem using Tx, Rx, GDN, 3.3V and external USB to serial board such as FTDO232. | ||
Cons | Not enough memory for OTA (over the air) uploads and updates. Has only 1MB of memory. | |
High voltage at the board at all time if you choose to power from the main AC power supply at home. | ||
LinkNode R4 and R8 | ||
Pros | 5V DC power easy to get from USB adpters | |
Large number of relays 4 and 8 respectively | ||
Has pins for Tx, Rx, 3.3V, GND, GPIO0. Zumungo converts Tx and Rx to GPIO3 and GPIO1 | ||
Programming (flashing Zunumgo) not a problem using Tx, Rx, GDN, 3.3V and external USB to serial board such as FTDO232. | ||
Enough memory for OTA (over the air) uploads and updates. | ||
Inexpensive on per relay basis | ||
Cons | Old fashioned barrel power connector as opposed to micro USB found elsewhere | |
Not enough pins to connect as many external sensors as competitors | ||
Yunshan (and other names for the same) | ||
Pros | Small size | |
Flexible power from 7VDC to 30V DC | ||
Has pins for Tx, Rx, GND, GPIO0 plus optically isolated GPIO05. Zumungo converts Tx and Rx to GPIO3 and GPIO1 | ||
Programming (flashing Zunumgo) not a problem using Tx, Rx, GDN, and external USB to serial board such as FTDO232. | ||
Enough memory for OTA (over the air) uploads and updates. | ||
Optically insulated input (the only board on our list that has it). | ||
Cons | Odd power supply voltages. Not accepting convenient USB +5V power supply. | |
One relay only. | ||
Aptinex | ||
Pros | Powered by 5V DC | |
Has most GPIOs on pins than any other. | ||
Has pins for Tx, Rx, GND, GPIO0 . Zumungo converts Tx and Rx to GPIO3 and GPIO1 | ||
Programming (flashing Zunumgo) not a problem using Tx, Rx, GDN, and external USB to serial board such as FTDO232. | ||
Enough memory for OTA (over the air) uploads and updates. | ||
Has 4 relays. | ||
Cons | More expensive than comparable boards. | |
Maybe hard to find in USA. Long time shipping from abroad. |